Внешний второй картоприемник на Аз.бокс

[ConstAntz]

может в этом проблема

root@azboxhd:~# lsmod
Module Size Used by
zd1211rw 60386 [COLOR="Red"]0[/COLOR] [COLOR="Lime"]<=модуль не исползуеться[/COLOR]
tun 16905 [COLOR="Red"]0[/COLOR] [COLOR="Lime"]<=модуль не исползуеться[/COLOR]
rtl8187 55623 [COLOR="Red"]0[/COLOR] [COLOR="Lime"]<=модуль не исползуеться[/COLOR]
rt73usb 26192 [COLOR="Red"]0[/COLOR] [COLOR="Lime"]<=модуль не исползуеться[/COLOR]
rt61pci 26710 [COLOR="Red"]0[/COLOR] [COLOR="Lime"]<=модуль не исползуеться[/COLOR]
rt2x00pci 5364 1 rt61pci
eeprom_93cx6 2620 2 rtl8187,rt61pci
rt2800usb 14087 [COLOR="Red"]0[/COLOR] [COLOR="Lime"]<=модуль не исползуеться[/COLOR]
rt2800lib 49725 1 rt2800usb
rt2500usb 20261 [COLOR="Red"]0[/COLOR] [COLOR="Lime"]<=модуль не исползуеться[/COLOR]
rt2x00usb 12301 3 rt73usb,rt2800usb,rt2500usb
rt2x00lib 45392 7 rt73usb,rt61pci,rt2x00pci,rt2800usb,rt2800lib,rt25 00usb,rt2x00usb
8192cu 592689 [COLOR="Red"]0[/COLOR] [COLOR="Lime"]<=модуль не исползуеться[/COLOR]
pl2303 14234 [COLOR="Red"]0[/COLOR] [COLOR="Lime"]<=модуль не исползуеться[/COLOR]
nfs 203552 [COLOR="Red"]0[/COLOR] [COLOR="Lime"]<=модуль не исползуеться[/COLOR]
lockd 87781 1 nfs
sunrpc 252611 3 nfs,lockd
ftdi_sio 35635 [COLOR="Red"]0[/COLOR] [COLOR="Lime"]<=модуль не исползуеться[/COLOR]
usbserial 39690 2 pl2303,ftdi_sio
cifs 309496 2
carl9170 90925 [COLOR="Red"]0[/COLOR] [COLOR="Lime"]<=модуль не исползуеться[/COLOR]
ath9k_htc 70006 [COLOR="Red"]0[/COLOR] [COLOR="Lime"]<=модуль не исползуеться[/COLOR]
mac80211 252036 8 zd1211rw,rtl8187,rt2x00pci,rt2800lib,rt2x00usb,rt2 x00lib,carl9170,ath9k_htc
ath9k_common 2416 1 ath9k_htc
ath9k_hw 392846 2 ath9k_htc,ath9k_common
ath 19596 4 carl9170,ath9k_htc,ath9k_common,ath9k_hw
863xdvb 1091752 23
sci 34077 1
nimdetect 4928 1 863xdvb
az_zl10353 6921 1 nimdetect
az_tda10023 7194 1 nimdetect
az_stv090x 69916 1 nimdetect
az_stv6110x 5221 1 nimdetect
az_mxl5007t 7691 1 nimdetect
az_mxl201rf 7664 1 nimdetect
az_cx24116 17908 1 nimdetect
863xi2c 22131 9 863xdvb,nimdetect,az_zl10353,az_tda10023,az_stv090 x,az_stv6110x,az_mxl5007t,az_mxl201rf,az_cx24116
em8xxx 2506889 2 863xdvb,863xi2c
llad 113162 3 863xdvb,863xi2c,em8xxx
irvfd 11245 4 863xdvb,nimdetect,az_zl10353,az_tda10023

dmesg

сорри за опечатки, дальше толко моск включить надо ))

а у меня нет такой строки

Ув. mserg! у меня тоже нет ни этих строк, ни этих девайсов, ни этих прошивок! сижу на офф, и пытаюсь помочь.

Обязательно прикрепляйте логи к вашим действиям!
мб, кто-то что-то увитит и нальет пивасик ))


mserg, не отчаивайтесь, пока я пытаюсь жить на этом форуме, то и Вам попытаюсь помочь!

Самое главное: узнать VID и PID устройства, которое Вы хотите/подключаете к приставке.(точка!)

---------- Сообщение добавлено 10.05.2013 в 00:33 ---------- Предыдущее сообщение размещено 09.05.2013 в 23:53 ----------

все то, что пометил красным - можно смело удалить командой 'rmmod ненужынй_модуль'


- обязательно даст преимущество в оперативке....

# free

 

[AtElEr]

[   19.430000] dev 8634 rev 86
[   19.800000] nimdetect: AZBox NIM detection in progress ...
[   19.830000] nimdetect: Registering FAKE SMP8634 I2C adapter ...
[   19.830000] Azbox model elite
[   19.850000] nimdetect: Detecting tuner 0
[   20.070000] nimdetect: Found DVBS/S2 -> CX24116
[   20.070000] nimdetect: Attaching Conexant 24116 driver ...
[   20.080000] nimdetect: Detecting tuner 1
[   20.300000] i2c_read_hw: ack error at sub address
[   20.300000] nimdetect: ReadReg: reg=0x7f (error=-1)
[   20.530000] i2c_read_hw: ack error at sub address
[   20.530000] nimdetect: ReadReg: reg=0x0 (error=-1)
[   20.540000] nimdetect: Total detected tuner(s) 1
[   20.570000] >>>>>>> CONFIG_TANGO2 :: HZ = 100
[   20.610000] sci0: SMP8634 driver loaded (rd_buffer_size = 288, wr_buffer_size                                                                                                  = 288, freq = 3600000)
[   20.770000] sci00: scard present detected.
[   20.770000] [2009-10-15 v1.7.0D-B05] sci00: scard activation starts ..[Tx_Mod                                                                                                 e=0]
[   20.790000] sci00: Try 5V ..
[   21.260000] SMP863x: Loading , build date:  Tue Nov 27 16:17:21 CET 2012
[   21.290000] SMP863x: Allocating DVBAdapter memory
[   21.320000] SMP863x: RUA Found pllad at 0
[   21.320000] SMP863x: Setting OUT MOD
[   21.350000] SetOutMod: 1080pGot response from 5V setting ..[priv->ans_idx = 5                                                                                                 ]
[   22.020000] Answering: 0xb7 0xac 0x1f 0x77 0x09
[   22.020000] -->> ATR Parsing Disable [priv->ans_idx = 5]
[   22.020000] ATRXBuf = [
[   22.020000]  B7
[   22.020000]  ]
[   22.020000] Wrong ts detected 0xb7 [Reset_mode_count=1]
[   22.020000] priv->reset_cnt=0
[   22.350000] [2009-10-15 v1.7.0D-B05] sci00: scard activation starts ..[Tx_Mod                                                                                                 e=0]
[   22.350000] sci00: Try 5V ..
[   23.590000] Got response from 5V setting ..[priv->ans_idx = 8]
[   23.590000] Answering: 0xdc 0xa8 0x88 0x48 0x53 0xe0 0x88 0x53
[   23.590000] -->> ATR Parsing Disable [priv->ans_idx = 8]
[   23.590000] ATRXBuf = [
[   23.590000]  B7 DC
[   23.590000]  ]
[   23.590000] Wrong ts detected 0xdc (need to reverse the MSB)
[   23.590000] sci00: Try 5V ..
[   23.920000] Re-Applying outports options with HDMI
[   24.420000] Re-Applying outports options with HDMI
[   24.950000] Got response from 5V setting ..[priv->ans_idx = 5]
[   24.950000] Answering: 0xed 0x35 0xf8 0xee 0x90
[   24.950000] -->> ATR Parsing Disable [priv->ans_idx = 5]
[   24.950000] ATRXBuf = [
[   24.950000]  B7 DC ED
[   24.950000]  ]
[   24.950000] Wrong ts detected 0xed [Reset_mode_count=2]
[   24.950000] priv->reset_cnt=1
[   25.280000] [2009-10-15 v1.7.0D-B05] sci00: scard activation starts ..[Tx_Mod                                                                                                 e=0]
[   25.280000] sci00: Try 5V ..
[   25.490000] SMP863x: Registering RFMOD char device
[   25.640000] SMP863x: Registering frameyuv char device
[   25.660000] SMP863x: Registering vtuner0 char device
[   25.660000] SMP863x: Registering misc/pvr char device
[   25.690000] SMP863x: Init DCC
[   25.690000] SMP863x: Init Microcode DCC
[   26.190000] SMP863x: Init GFX
[   26.210000] SMP863x FB: src_surf 0x16E09664 src_surf_align 0x16E0A000, src_si                                                                                                 ze 8372800, src_align_size 8370340
[   26.240000] SMP863x: OSD: dst_surf = 27a81398, size = 3686400
[   26.330000] fb0: SMP863x GFX fb frame buffer device, using 8174K of video mem                                                                                                 ory
[   26.330000] SMP863x: Registering Sigma DVB Adapter
[   26.370000] DVB: registering new adapter (SIGMA 863x DVB)
[   26.370000] SMP863x: Initializing DVB frontend 0...
[   26.400000] DVB: registering adapter 0 frontend 0 (Conexant CX24116/CX24118).                                                                                                 ..
[   26.430000] SMP863x: Initializing DVB demux 0...
[   26.430000] SMP863x: Initializing DVB demux device 0...
[   26.470000] SMP863x: Initializing DVB demux 1...
[   26.470000] SMP863x: Initializing DVB demux device 1...
[   26.520000] SMP863x: Initializing DVB demux 2...
[   26.520000] SMP863x: Initializing DVB demux device 2...
[   26.550000] Got response from 5V setting ..[priv->ans_idx = 5]
[   26.550000] Answering: 0xed 0x35 0xf8 0xee 0x90
[   26.550000] -->> ATR Parsing Disable [priv->ans_idx = 5]
[   26.550000] ATRXBuf = [
[   26.550000]  B7 DC ED ED
[   26.550000]  ]
[   26.550000] Wrong ts detected 0xed [Reset_mode_count=3]
[   26.550000] priv->reset_cnt=2
[   26.690000] SMP863x: Registering misc/pvr char device
[   26.710000] SMP863x: Registering Sigma DVB Audio Device
[   26.720000] SMP863x: Audio open the buffer pools
[   26.740000] SMP863x: Audio DMA pool id = 0
[   26.750000] SMP863x: Registering Sigma DVB Video Device
[   26.790000] SMP863x: Video open the buffer pools
[   26.790000] SMP863x: Video DMA pool id = 1
[   26.790000] SMP863x: Demux[PVR] open the buffer pools
[   26.810000] SMP863x: Demux[PVR] DMA pool id = 2
[   26.820000] SMP863x: Demux[VTuner] open the buffer pools
[   26.830000] SMP863x: Demux[vTuner] DMA pool id = 3
[   26.830000] SMP863x: Init Sigma Demux Tasks
[   26.840000] SMP863x: Init Sigma VCXO
[   26.840000] SMP863x: Registering Sigma DVB CA0 Device
[   26.850000] SMP863x: Registering Sigma DVB CA1 Device
[   26.860000] SMP863x: start kVcxoRegulate
[   26.870000] SMP863x: start kMonitorVideo
[   26.870000] SMP863x: start kTask1
[   26.870000] SMP863x: start kTask2
[   26.880000] SMP863x: start kTask3
[   26.880000] SMP863x: start khdmi
[   26.900000] SMP863x: All init done
[   26.940000] [2009-10-15 v1.7.0D-B05] sci00: scard activation starts ..[Tx_Mod                                                                                                 e=0]
[   26.940000] sci00: Try 5V ..
[   27.720000] usbcore: registered new interface driver usbserial
[   27.730000] USB Serial support registered for generic
[   27.740000] usbcore: registered new interface driver usbserial_generic
[   27.740000] usbserial: USB Serial Driver core
[   27.830000] USB Serial support registered for FTDI USB Serial Device
[   27.870000] usbcore: registered new interface driver ftdi_sio
[   27.920000] ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
[   28.130000] RPC: Registered named UNIX socket transport module.
[   28.130000] RPC: Registered udp transport module.
[   28.160000] RPC: Registered tcp transport module.
[   28.160000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   28.200000] Got response from 5V setting ..[priv->ans_idx = 8]
[   28.200000] Answering: 0x3b 0x15 0x11 0x12 0xca 0x07 0x11 0xca
[   28.200000] -->> ATR Parsing Disable [priv->ans_idx = 8]
[   28.200000] ATRXBuf = [
[   28.200000]  B7 DC ED ED 3B
[   28.200000]  ]
[   28.200000] Correct ts detected 0x3b
[   28.200000] sci00: got response from the scard --> switch to normal
[   28.650000] tun: Universal TUN/TAP device driver, 1.6
[   28.650000] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[   28.960000] SetOutMod: 1080p50
[   30.820000] Re-Applying outports options with HDMI
[   31.270000] Re-Applying outports options with HDMI
[   32.410000] SMP863x: VIDEO SELECT SOURCE MEMORY
[   32.420000] SMP863x: VIDEO PLAY
[   32.430000] SMP863x STC PLAY
[   32.430000] SMP863x: VIDEO CONTINUE
[   32.430000] SMP863x: VIDEO CLEAR
[   32.460000] SMP863x STC STOP
[   32.470000] SMP863x: Video new PTS value 0
[   32.490000] SMP863x STC PLAY
[   32.500000] Adding 59388k swap on /dev/hda3.  Priority:-1 extents:1 across:59                                                                                                 388k
[   32.940000] SMP863x: VIDEO STOP
[   32.960000] SMP863x STC STOP
[   32.960000] SMP863x: VIDEO SELECT SOURCE DEMUX
[   34.840000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   37.320000] scard_open :: scard_priv[minor=0].b_mode  = 1
[   37.380000] SMP863x video: MPEG2
[   37.400000] SMP863x: VIDEO SELECT SOURCE MEMORY
[   37.420000] SMP863x: VIDEO PLAY
[   37.420000] SMP863x STC PLAY
[   37.430000] SMP863x: VIDEO CONTINUE
[   37.430000] SMP863x: VIDEO CLEAR
[   37.460000] SMP863x STC STOP
[   37.470000] SMP863x: Video new PTS value 0
[   37.480000] SMP863x STC PLAY
[   37.920000] SMP863x: VIDEO STOP
[   37.940000] SMP863x STC STOP
[   37.940000] SMP863x: VIDEO SELECT SOURCE DEMUX
[   38.460000] T=0 f=5 EGT=0 ETU=372
[   40.380000] 00000000 00000000
[   40.380000] FBIO ACCEL 0
[   40.380000] 00000000 00000000
[   40.390000] FBIO ACCEL 2
[   40.430000] SMP863x manual blit 1
[   40.430000] New FB OSD resolution [1280:720] , virtual [1280:1440], bpp 32
[   40.460000] SMP863x: OSD: dst_surf = 252a3ca8, size = 3686400
[   40.500000] SMP863x FB PAN: 0 0
[   42.580000] cx24116_cmd_execute() Firmware not responding
[   42.580000] cx24116_firmware_ondemand: Waiting for firmware upload (dvb-fe-cx                                                                                                 24116.fw)...
[   42.640000] cx24116_firmware_ondemand: Waiting for firmware upload(2)...
[   45.710000] cx24116_firmware_ondemand: Firmware upload complete
[   45.740000] cx24116_initfe: FW version 1.22.82.0
[   58.080000] SMP863x: RFNum 36 PwrMode 0 SysMode 1 Sound 0
[   58.090000] SMP863x: RFNum 36 PwrMode 0 SysMode 1 Sound 0
[   58.100000] SMP863x: RFNum 36 PwrMode 0 SysMode 1 Sound 0
[   58.110000] SMP863x: RFNum 36 PwrMode 0 SysMode 1 Sound 0
[   58.120000] SMP863x: RFNum 36 PwrMode 0 SysMode 1 Sound 0
root@azboxhd:~# lsmod
Module                  Size  Used by
tun                    16905  0
eeprom_93cx6            2620  0
nfs                   203584  0
lockd                  87781  1 nfs
sunrpc                252611  3 nfs,lockd
ftdi_sio               35635  0
usbserial              39690  1 ftdi_sio
cifs                  309496  0
mac80211              252004  0
863xdvb              1091444  26
sci                    34045  1
nimdetect               4842  1 863xdvb
az_zl10353              6921  1 nimdetect
az_tda10023             7194  1 nimdetect
az_stv090x             91530  1 nimdetect
az_mxl5007t             7691  1 nimdetect
az_mxl201rf             7664  1 nimdetect
az_cx24116             17908  1 nimdetect
863xi2c                22131  8 863xdvb,nimdetect,az_zl10353,az_tda10023,az_stv090x,az_mxl5007t,az_mxl201rf,az_cx24116
em8xxx               2506889  2 863xdvb,863xi2c
llad                  113162  3 863xdvb,863xi2c,em8xxx
irvfd                  11229  4 863xdvb,nimdetect,az_zl10353,az_tda10023
root@azboxhd:~# insmod /lib/modules/3.3.1-opensat/kernel/drivers/usb/serial/usbserial.ko
insmod: error inserting '/lib/modules/3.3.1-opensat/kernel/drivers/usb/serial/usbserial.ko': -1 File exists
root@azboxhd:~# insmod /lib/modules/3.3.1-opensat/kernel/drivers/usb/serial/ftdi_sio.ko vendor=0x0403 product=0x6001
insmod: error inserting '/lib/modules/3.3.1-opensat/kernel/drivers/usb/serial/ftdi_sio.ko': -1 File exists
root@azboxhd:~# insmod /lib/modules/3.3.1-opensat/kernel/drivers/usb/serial/ftdi_sio.ko
insmod: error inserting '/lib/modules/3.3.1-opensat/kernel/drivers/usb/serial/ftdi_sio.ko': -1 File exists
root@azboxhd:~# insmod /lib/modules/3.3.1- opensat/kernel/drivers/usb/serial/ftdi_sio.ko
insmod: can't read '/lib/modules/3.3.1-': No such file or directory
root@azboxhd:~# insmod /lib/modules/3.3.1-opensat/kernel/drivers/usb/serial/ftdi_sio.ko
insmod: error inserting '/lib/modules/3.3.1-opensat/kernel/drivers/usb/serial/ftdi_sio.ko': -1 File exists
root@azboxhd:~# cat /proc/bus/usb/devices
cat: can't open '/proc/bus/usb/devices': No such file or directory
root@azboxhd:~#

эксперименты ни к чему не приводят.

 

[AtElEr]

Установил OpenRSI 2.1 (старое ядро) 2.6 по моему.

При команде lsmod :

T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0403 ProdID=6001 Rev= 6.00
S: Manufacturer=FTDI
S: Product=FT232R USB UART
S: SerialNumber=A400ZKT0
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 90mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=ftdi_sio
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms


При команде dmesg есть вот что:


[ 9.817000] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.100000] usbserial: no version for "struct_module" found: kernel tainted.
[ 17.117000] usbserial: No versions for exported symbols. Tainting kernel.
[ 17.165000] usbcore: registered new interface driver usbserial
[ 17.166000] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[ 17.254000] drivers/usb/serial/usb-serial.c: USB Serial support registered fo r FTDI USB Serial Device
[ 17.282000] ftdi_sio 2-2:1.0: usb_probe_interface
[ 17.283000] ftdi_sio 2-2:1.0: usb_probe_interface - got id
[ 17.284000] ftdi_sio 2-2:1.0: FTDI USB Serial Device converter detected
[ 17.313000] drivers/usb/serial/ftdi_sio.c: Detected FT232RL
[ 17.342000] usb 2-2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 17.343000] usbcore: registered new interface driver ftdi_sio
[ 17.344000] drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
[ 17.384000] drivers/usb/serial/usb-serial.c: USB Serial support registered fo r pl2303
[ 17.404000] usbcore: registered new interface driver pl2303
[ 17.405000] drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adapto r driver
[ 17.573000]
[ 17.573000] rtw driver version=v3.3.0_2971.20111128
[ 17.577000] usbcore: registered new interface driver rtl8192cu
[ 17.795000] rtusb init --->
[ 17.822000] usbcore: registered new interface driver rt2870
[ 17.932000] usbcore: registered new interface driver rt73
[ 18.110000] usbcore: registered new interface driver r871x_usb_drv
[ 18.654000] em8xxx [/OE/SMP8634/mrua_SMP8634_20110531T181327_GCC4_facsprod_le

root@azboxhd:~# lsmod
Module Size Used by
863xdvb 269024 26
nimdetect 6880 1 863xdvb
stv090x 66640 1 nimdetect
stv6110x 6816 1 nimdetect
zl10353 9008 1 nimdetect
mxl5007t 8992 1 nimdetect
tda10023 9024 1 nimdetect
mxl201rf 9120 1 nimdetect
cx24116 19984 1 nimdetect
smp8634i2c 27408 9 863xdvb,nimdetect,stv090x,stv6110x,zl10353,mxl5007t,tda10023,mxl201rf,cx24116
rt61 342416 0
sci 37840 2
em8xxx 2515024 4 863xdvb,smp8634i2c
llad 128416 5 863xdvb,smp8634i2c,em8xxx
8712u 358560 0
rt73 301184 0
rt3070sta 745024 0
8192cu 576864 0
pl2303 22656 0
ftdi_sio 36304 0
usbserial 33104 2 pl2303,ftdi_sio
irvfd 13616 5 863xdvb,nimdetect,zl10353,tda10023
root@azboxhd:~#

Но пока карту запустить не смог , плюс версия Оскама (бинарник от 34 мода юрика) не кажет лог в вебморде, чтоб понять причину почему написано Of.

---------- Сообщение добавлено в 23:28 ---------- Предыдущее сообщение размещено в 22:07 ----------

а вот и лог с оскама

2013/05/31 23:27:29 1830 2E5314B0 c root (7BE0&000000/0835/00CC/0000/4D:940D/00-00): rejected user ident (1 ms) (no card support 7BE0:000000)
2013/05/31 23:27:29 1830 2CCE14B0 r ERROR Phoenix_GetStatus: ioctl error in card detection for tk
2013/05/31 23:27:29 1830 2CCE14B0 r Error getting status of terminal.
2013/05/31 23:27:29 1830 2CCE14B0 r ERROR Phoenix_GetStatus: ioctl error in card detection for tk
2013/05/31 23:27:29 1830 2CCE14B0 r Error getting status of terminal.
2013/05/31 23:27:29 1830 2CCE14B0 r ERROR Phoenix_GetStatus: ioctl error in card detection for tk
2013/05/31 23:27:29 1830 2CCE14B0 r Error getting status of terminal.
2013/05/31 23:27:29 1830 2CCE14B0 r ERROR Phoenix_GetStatus: ioctl error in card detection for tk
2013/05/31 23:27:29 1830 2CCE14B0 r Error getting status of terminal.
2013/05/31 23:27:29 1830 2CCE14B0 r ERROR Phoenix_GetStatus: ioctl error in card detection for tk
2013/05/31 23:27:29 1830 2CCE14B0 r Error getting status of terminal.
2013/05/31 23:27:29 1830 2CCE14B0 r ERROR Phoenix_GetStatus: ioctl error in card detection for tk
2013/05/31 23:27:29 1830 2CCE14B0 r Error getting status of terminal.
2013/05/31 23:27:30 1830 2CCE14B0 r ERROR Phoenix_GetStatus: ioctl error in card detection for tk
2013/05/31 23:27:30 1830 2CCE14B0 r Error getting status of terminal.
2013/05/31 23:27:30 1830 2CCE14B0 r ERROR Phoenix_GetStatus: ioctl error in card detection for tk
2013/05/31 23:27:30 1830 2CCE14B0 r Error getting status of terminal.
2013/05/31 23:27:30 1830 2CCE14B0 r ERROR Phoenix_GetStatus: ioctl error in card detection for tk
2013/05/31 23:27:30 1830 2CCE14B0 r Error getting status of terminal.
2013/05/31 23:27:30 1830 2CCE14B0 r ERROR Phoenix_GetStatus: ioctl error in card detection for tk
2013/05/31 23:27:30 1830 2CCE14B0 r Error getting status of terminal.
2013/05/31 23:27:30 1830 2CCE14B0 r ERROR Phoenix_GetStatus: ioctl error in card detection for tk
2013/05/31 23:27:30 1830 2CCE14B0 r Error getting status of terminal.
2013/05/31 23:27:30 1830 2CCE14B0 r ERROR Phoenix_GetStatus: ioctl error in card detection for tk
2013/05/31 23:27:30 1830 2CCE14B0 r Error getting status of terminal.
2013/05/31 23:27:30 1830 2CCE14B0 r ERROR Phoenix_GetStatus: ioctl error in card detection for tk
2013/05/31 23:27:30 1830 2CCE14B0 r Error getting status of terminal.